DRDO designs disinfection chamber, spl face mask

News Network
April 5, 2020

New Delhi, Apr 5: Joining efforts to fight COVID-19, the Defence Research and Development Organisation (DRDO) has designed a full-body disinfection chamber and a special face protection mask for healthcare professionals, officials said.

The special chamber called 'PSE' has been designed by Vehicle Research Development Establishment (VRDE), Ahmednagar, a DRDO Laboratory.

The walk through enclosure is designed for personnel decontamination, one person at a time. It is a portable system equipped with sanitiser and soap dispenser, officials said.

The decontamination is started using a foot pedal at the entry. On entering the chamber, electrically-operated pump creates a disinfectant mist of hypo sodium chloride for disinfecting, the DRDO said in a statement.

The mist spray is calibrated for an operation of 25 seconds and stops automatically indicating completion of operation. As per procedure, personnel undergoing disinfection will need to keep their eyes closed while inside the chamber, it said.

The system consists of roof mounted and bottom tanks with a total of 700 litres capacity. Approximately 650 personnel can pass through the chamber for disinfection until the refill is required, the DRDO said.

The system has see-through glass panels on side walls for monitoring purpose and is fitted with lights for illumination during night-time operations, it added.

This system can be used for disinfection of personnel at the areas of controlled ingress and egress such as entry and exit to hospitals, malls, office buildings and critical installations, officials said.

Also, Research Centre Imarat (RCI), Hyderabad, and Terminal Ballistics Research Laboratory (TBRL), Chandigarh, have developed face protection mask for healthcare professionals handling COVID-19 patients, the DRDO added.

Its light weight construction makes it convenient for comfortable wear for long duration. This design uses commonly available A4 size Over-Head Projection (OHP) film for face protection, it said.

One thousand face shields are being produced daily in TBRL and provided to Postgraduate Institute of Medical Education and Research (PGIMER), Chandigarh, it said.

Similarly, 100 are produced at RCI and these have been handed over to Employees' State Insurance Corporation (ESIC), Hyderabad. A demand of 10,000 shields has been received from PGIMER and ESIC hospitals based on successful user trials, the DRDO added.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
News Network
April 25,2024

EVM.jpg

Electronics Corporation of India Ltd and Bharat Electronics Ltd have refused to disclose the names and contact details of the manufacturers and suppliers of various components of EVMs and VVPATs under the RTI Act citing "commercial confidence", according to RTI responses from the PSUs to an activist.

Activist Venkatesh Nayak had filed two identical Right To Information applications with the ECIL and BEL, seeking the details of the manufacturers and suppliers of various components used in the assembling of the electronic voting machines (EVMs) and voter-verifiable paper audit trail (VVPATs).

The VVPAT is an independent vote verification system which enables electors to see whether their votes have been cast correctly.

The ECIL and the BEL, public sector undertakings under the Ministry of Defence, manufacture EVMs and VVPATs for the Election Commission.

Nayak also sought a copy of the purchase orders for the components from both PSUs.

"Information sought is in commercial confidence. Hence details cannot be provided under Section 8(1)(d) of the RTI Act," BEL said in its response.

A similar response was sent by ECIL which said the details requested are related to a product which is being manufactured by ECIL, and third party in nature.

"Disclosing of details will affect the Competitive position of ECIL. Hence, Exemption is claimed under section 8(1) (d) of RTI ACT, 2005," it said.

In response to the purchase order copies, ECIL's central public information officer said the information is "voluminous" which would disproportionately divert the resources of the Public Authority.

"Further, the information will give away the design details of EVM components. The same may pose a danger to the machines produced. Hence, the exemption is claimed U/s 7(9) and under section 8(1)(d) of RTI Act, 2005," ECIL said.

Section 8(1)(d) of the RTI Act exempts from disclosure the information, including commercial confidence, trade secrets or intellectual property, the disclosure of which would harm the competitive position of a third party, unless the competent authority is satisfied that larger public interest warrants the disclosure of such information.

Section 7(9) of the Act says the information shall ordinarily be provided in the form in which it is sought unless it would disproportionately divert the resources of the public authority or would be detrimental to the safety or preservation of the record in question.

"I don't know whose interests they are trying to protect against the right to know of close to a billion-strong electorate. ECIL said that disclosure of the purchase orders will reveal the design details of the components and this may pose a danger to the machines produced. ECIL did not upload even a signed copy of its reply on the RTI Online Portal," Nayak said.

He said it is reasonable to infer that the two companies are not manufacturing every single item of the EVM-VVPAT combo or else the two companies would have replied that they are manufacturing all these components internally without any outsourcing being involved.

"But the electorate is expected to take everything about the voting machines based on what the ECI is claiming in its manuals and FAQs," Nayak said.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
News Network
May 4,2024

canadaindia.jpg

Canadian Police said they have arrested three Indians they suspect were part of the alleged hit squad that had killed Hardeep Singh Nijjar, a Sikh separatist leader involved with the Khalistan movement, which calls for an independent Sikh state.

Nijjar's killing had become the epicentre of a diplomatic row between India and Canada last year after Prime Minister Justin Trudeau alleged the role of "Indian agents" in the murder. India had rejected the charge as "absurd" and "motivated".

The three arrested Indians - Karan Brar, 22, Kamalpreet Singh, 22, Karanpreet Singh, 28 - were living as non-permanent residents in Alberta for three to five years, said Superintendent Mandeep Mooker, who leads the Integrated Homicide Investigation Team. The police have also released their photos.

They have been charged with first-degree murder and conspiracy to commit murder, showed court documents.

Police said that none of the suspects were known to them earlier and they were investigating their possible ties to the Indian government.

The murder remains "very much under active investigation," Royal Canadian Mounted Police (RCMP) Assistant Commissioner David Teboul told a press conference on Friday.

"There are separate and distinct investigations ongoing into these matters, certainly not limited to the involvement of the people arrested today, and these efforts include investigating connections to the government of India," CTV News quoted him as saying.

Nijjar, a Canadian citizen who was wanted in India on various terror charges, was shot dead outside a gurdwara in Surrey on June 18, 2023. Trudeau's charge against India sparked a massive row later that year with both countries expelling diplomats of the other country.

A fresh row erupted earlier this week after separatist slogans on 'Khalistan' were raised at an event addressed by Trudeau, prompting New Delhi to summon their Deputy High Commissioner and lodge a strong protest.

On the sidelines of the event, Trudeau told reporters that Nijjar's killing had created a "problem" that he could not have ignored.

India rejected his comment and said it once again showed Canada provides political space given to separatism, extremism, and violence. "This not only impacts India-Canada relations but also encourages a climate of violence and criminality in Canada to the detriment of its own citizens," foreign ministry spokesperson Randhir Jaiswal said.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
News Network
April 25,2024

modirahul.jpg

The Election Commission of India on Thursday announced that it had taken cognisance of violations to the Model Code of Conduct by both Prime Minister Narendra Modi and Congress leader Rahul Gandhi.

While Modi has indulged in a diatribe against Muslims, without naming them, using terms like 'infiltrators' and 'those with more children', Rahul has been accused of making a false claim about 'rise in poverty'.

Both the BJP and INC have raised allegations of causing hatred and divisions based on caste, religion, language, and community, ANI reported.

While the EC had initially refused to comment on Modi's speeches, sources had told PTI that the commission was 'looking into' the remarks made by the BJP leader.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.